|
|
||
|
|
Tusker Broadheads Tusker broadheads have been the Australian standard since 1964. All Tusker broadheads are made from chemically coated high carbon spring steel hardened to 50-52 Rockwell, resulting in a very tough, durable broadhead that takes and holds a wicked sharp edge. Braveheart Archery is pleased to offer you the most extensive line up of Tusker broadheads available anywhere. From bunnies to buffalo, Tusker offers a no nonsense high value broadhead that will get the job done. All Tusker broadheads feature conventional double bevel grinds, with the Concordes additionally offered in right and left single bevel grinds. All glue on heads sold in 6 packs, all screw in heads sold in 3 packs. Tuskers are tough! Watch John at Tusker match Tuskers against bull shoulders. He gives a short sharpening demonstration too.
Tusker Spirit The Tusker Spirit glue on weighs 100 grains and has a 5/16” ferrule for 5/16” shafting, or use with 5/16” screw in adapters. The Spirit screw in weighs 125 grains and features factory installed screw in adapters. The Spirit is 1 13/16” long by 1 1/8” wide, .035 spring steel main blade.
Tusker Javelin The Tusker Javelin glue on weighs 125 grains and has a 11/32” ferrule for 11/32” or 23/64” shafting, or use with screw in adapters. The Javelin screw in weighs 150 grains and features factory installed screw in adapters. The Javelin is 2 3/16” long by 1 1/8” wide, .035 spring steel main blade.
Tusker Concorde The Tusker Concorde glue on is available in both 155 and 190 grains, with a 11/32” ferrule for 11/32” or 23/64” shafting, or use with screw in adapters. Choose from single left bevel, single right bevel or traditional double bevel grinds, all with tanto tips. The Concorde screw ins are offered in 190 grain double bevel with needle tip, or choose from 250 grain and 300 grain single left bevel screw ins with tanto tips. Concordes feature long and thick .050 main blades for maximum strength and penetration. The Concorde is 2 5/8” long by 1 1/8” wide.
John at Tusker demonstrates his sharpening method.
Tusker Delta The Tusker Delta glue on weighs 160 grains with a 11/32” ferrule for use with 11/32” or 23/64” shafting, or use with screw in adapters. The Delta screw ins are offered in 195 or 250 grain weights. The Delta is 2 1/2” long by 1 3/8” wide, .035 spring steel main blade.
Tusker Aztec The Tusker Aztec glue on weighs 175 grains with a 11/32” ferrule for 11/32” or 23/64” shafting, or use with screw in adapters. The Aztec screw ins are available in both 200 and 300 grains. The Aztec is 2 1/2” long by 1 1/4” wide, .035 spring steel main blade. |
|
|
Welcome
About Us
Firefly Bows
Arrow
Building
Carbon
Arrows & Shafts Tusker
Grizzly
Eclipse/Zwickey
STOS |
||
