|
|
|
|
|
Magnus Broadheads Magnus Stinger Magnus Stinger screw in broadheads feature knife grade stainless
steel and the Magnus Diamond Tip, for superior strength and bone
splitting penetration. Stainless bleeder blades are double
sharpened and locked in the aircraft grade 7075 aluminum ferrule
by the Magnus Retainer Block. Excellent flight and penetration,
razor sharp and ready to hunt right out of the pack. The 100
grain has a 1 1/16 inch cutting width, the 125 and 150 grain
Stingers feature a 1 1/8 inch cutting width, with 3/4 inch
bleeders on the 4 blade models. Covered by the Magnus lifetime
guarantee, break one and Magnus will replace it! Magnus Snuffer Snuffers, the ultimate 3 blade broadhead! Traditional glue on
style for 11/32 or 23/64 shafts, or use with screw in adapters.
Made from carbon steel, copper brazed and heat treated to 44c
Rockwell hardness for strength and ease of sharpening. Covered
by the Magnus lifetime guarantee. Magnus Traditional Screw In Traditional screw in broadheads for carbon or aluminum arrows.
Strong 7075 aluminum adapters factory installed for convenience
and lightweight strength. Triple laminated, spot welded and
copper brazed, with a full 1 1/4 inch wide cut. The 125 and 140
grain 2 blades heads feature solid main blades, the 100 grain 2
blade and 125 grain 4 blade heads feature vented main blades.
Covered by the Magnus lifetime guarantee.
Magnus I Magnus I traditional glue on broadheads for 11/32 or 23/64
shafts, or use with screw in adapters. We like to call these
“flying hatchets” and one look will tell you why. Great Magnus
quality with an awesome 1 ½ inch cutting swath. Diamond Tip for
bone crunching strength and penetration. Triple laminated, spot
welded and copper brazed. A great choice when you need the
penetration of a 2 blade and the extra cutting of a multi-blade
head. Choose the 4 blade for phenomenal cutting and huge wound
channels. Covered by the Magnus lifetime guarantee.
Magnus II traditional glue on broadheads for 11/32 or 23/64 shafts, or use with screw in adapters. Magnus “Diamond Tip” for bone breaking strength and penetration. Triple laminated, spot welded and copper brazed, 1 ¼” main blade cutting width with both 2 and 4 blades available. Covered by the Magnus lifetime guarantee. Note: The Magnus II 4 blade heads use the same replacement bleeder blades that are listed above with the Magnus I broadheads.
|
|
Welcome
About Us
Firefly Bows
Arrow
Building
Carbon
Arrows & Shafts Tusker
Grizzly
Eclipse/Zwickey
STOS |
|
